Jablotron

JA-106K Control panel with built-in GSM/GPRS/ LAN communicator
The JA-106K is a JA-100 alarm system control panel. It offers flexible settings and allows the smart protection of bigger family houses, offices, companies and apartment complexes. The settings are programmed by F-Link SW.
 

For more details pleas click here

JA-190X Telephone communicator module
A control panel with this module connected to a phone line transmits alarm voice messages,communicates with ARCs and allows remote access. The communicator uses tone dialing and features basic surge protection.

 

For more details pleas click here

Control panel with built-in GSM / GPRS communicator
The JA-101K control panel offers flexible setting and allows easy protection for small premises, bigger family houses, offi ces and companies. The desired settings and the size of the system is programmed by F-link SW.

 

For more details pleas click here

JA-101KR-LAN Control panel with built-in GSM/GPRS and LAN communicators
The JA-101KR-LAN is the basic element of the JABLOTRON 100 security system. It enables flexible system setting and the easy protection of small commercial premises, houses, cottages, offices in a bus design, in a wireless or combined design.
JA-111SH Bus shock and tilt detector
It has two operational modes. The mode for the detection of shocks (vibrations) to doors, windows, etc. can be used to indicate attempts to breach these. The tilt detection mode can be used to indicate unwanted tampering with the object.

 

For more details pleas click here

JA-110ST Bus combined smoke and temperature detector
The JA-110ST bus fire detector (optical and temperature detection) detects fire in residential and commercial buildings . Allows you to set detection: optical and thermal, optical or thermal, optical only or temperature only.

 

For more details pleas click here

JA-111ST Bus combined smoke and heat detector
It is used to detect fire hazards in the interior of residential or commercial buildings. The product is not designed to be installed in industrial premises. The detector is powered via the control panel bus (EN 54-7; EN 54-5).

 

For more details pleas click here

JA-111TH Bus temperature detector
It supports heating control by means of a control panel programmable output based on the measured temperature. All the functions are set in MyJABLOTRON, allowing the user to monitor and control everything anytime anywhere.

 

For more details pleas click here

JA-110F Bus flood detector
The detector is used to indicate flooding (in basements, bathrooms, etc.). This information is transmitted to the alarm system bus.

 

For more details pleas click here

JA-110A Bus internal siren
The JA-110A Bus siren is for indoor use and is designed to sound alarms, as well as entrance and exit delays and PG activations in the security system.

 

For more details pleas click here

JA-111A Bus external siren
The JA-111A bus external siren is designed to sound alarms and to signal activation and deactivation of PG outputs in the security system. The siren communicates with and is powered by the bus.

 

For more details pleas click here

JA-112J Bus emergency/control wall-mounted button
The JA-112J bus wall-mounted button is designed to release an emergency alarm or to control PG outputs.

 

For more details pleas click here

JA-110P Bus PIR motion detector
The JA-110P is a bus PIR motion detector designed to protect interiors by infrared motion detection in the room . The characteristics of detection can be optimized by using interchangeable lenses.

 

For more details pleas click here

JA-111P-WW Bus PIR motion detector
It is designed to detect human body motion inside buildings. Its guaranteed detection coverage is 90° / 12 m.

 

For more details pleas click here

JA-111P-WG Bus PIR motion detector
It is designed to detect human body motion inside buildings.

 

For more details pleas click here

JA-120PB Bus combined PIR motion and glass-break detector
It serves for the detection of human movement in building interiors and for the detection of breaking glass windows. This detector combines two sensors (PIR motion & acoustic glass break) in one housing.

 

For more details pleas click here

JA-120PW Bus PIR / MW motion detector
The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector has a high alarm detection certainty.

 

For more details pleas click here

JA-120PC Bus PIR Motion Detector with Camera
The JA-120PC is a bus-powered PIR movement detector with a colour camera which takes colour images of up to 640 x 480 pixels definition.

 

For more details pleas click here

JA-110M Bus module for magnetic detectors - 2 inputs
The JA-110M bus module is used to connect wired magnetic door/window detectors to the bus and contains two independent inputs programmable to be NC/NO or using a balancing resistor.

 

For more details pleas click here

JA-111M Mini bus magnetic detector
The JA-111M is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

 

For more details pleas click here

JA-118M BUS module for magnetic detectors - 8 inputs
The module provides 8 inputs designed especially for connecting magnetic detectors. Installation into a JA-190PL universal multipurpose box is recommended (or into a KU-68 wall –mounted universal box).

 

For more details pleas click here

JA-111H TRB Bus module interface for wire detector
The JA-111H TRB module is designed for the connection of any wired detector (with contact or impulse outputs) to the JABLOTRON 100 system and provides it with a power supply.

 

For more details pleas click here

JA-116H BUS expander – 16 inputs
Bus expander is used for powering and connecting up to 16 detectors with contact outputs. It is possible to install the module straight into the JA-106K control panel.

 

For more details pleas click here

JA-110R Bus interface for wireless components
The JA-110R two-way radio module is used to connect wireless devices such as detectors, to the security system. For complete coverage of the secure area up to 3 JA-110R modules can be installed.

 

For more details pleas click here

JA-150P Wireless motion PIR detector
The JA-150P is a PIR motion detector designed for interior protection. It detects object movement having a human body temperature. The detection characteristic may be optimised by using the alternative lenses.

 

For more details pleas click here

JA-151P-WW Wireless PIR motion detector
It is designed to detect human body motion inside buildings. Its guaranteed detection coverage is 90° / 12 m.

 

For more details pleas click here

JA-151P-WG Wireless PIR motion detector
It is designed to detect human body motion inside buildings.

 

For more details pleas click here

JA-160PC Wireless PIR motion detector combined with a camera
The JA-160PC is wireless component of the JABLOTRON 100 system. It serves for the detection of human movement in building interiors and visual alarm confirmation.

 

For more details pleas click here

JA-180PB Wireless PIR and glass-break combined detector
The JA-180PB combines the JA-180P PIR motion sensor with a glass-break sensor in one housing. Each sensor is enrolled to the control panel separately.

 

For more details pleas click here

JA-185P Wireless ceiling PIR detector
The JA-185P is a small-size wireless PIR sensor suitable for protecting small rooms or car interiors. It is designed for wall or ceiling installations.

 

For more details pleas click here

JA-186P Wireless dual PIR indoor detector
Designed to detect human body movement inside buildings. Detection in two zones gives high detection certainty against moving pets.

 

For more details pleas click here

JA-180W Wireless PIR and MW combined detector
The detector is used for human motion detection in the interior of a building. Thanks to the combination of motion and microwave detection, the detector is highly resistant to false alarms.

 

For more details pleas click here

JA-157P Dual zone outdoor wireless motion detector - curtain
The detector is used for human motion detection in the interior of a building. The JA-157P wireless outdoor detector with curtain lens characteristics is designed to indicate disturbances outside the building caused by human bodies.

 

For more details pleas click here

JA-158P Wireless outdoor PIR detector
The detector is used for human motion detection in the interior of a building. The JA-158P is an outdoor intruder wireless detector designed to detect human body movement in a protected area.

 

For more details pleas click here

JA-159P Wireless outdoor PIR detector
The JA-159P is an outdoor intruder wireless detector designed to detect human body movement in a protected area.

 

For more details pleas click here

JA-150IR Wireless optical barrier
Detector is designed for the indication of a breach into a protected area by crossing the IR line.

 

For more details pleas click here

JA-150IR Wireless optical barrier
The JA-151IR four-beam infra-red optical barrier is designed for the indication of a breach into a protected area.

 

For more details pleas click here

JA-180B Wireless acoustic glass-break detector
It is used to detect the breaking of glass window panes and glass surfaces in buildings. It reacts to the change of air pressure accompanied by the characteristic sound of breaking glass.

 

For more details pleas click here

JA-151M Mini wireless magnetic detector
The JA-151M is designed for the detection of windows or door opening. It has a unique small design suitable for residential or commercial installations.

 

For more details pleas click here

JA-150M Wireless magnetic detector with 2 universal inputs
It is a magnetic detector with two configurable independent inputs. The detector is also designed to detect the handling of roller blinds, if it is equipped with a CT-01 roller detector.

 

For more details pleas click here

JA-182M Wireless invisible magnetic detector
The JA-182M is designed for the detection of windows (door) opening. An “invisible” magnetic sensor is installed into plastic or wooden window frames and is therefore totally discreet.

 

For more details pleas click here

JA-182SH Wireless shock or tilt detector
The shock detection mode monitors doors, windows, light partitions etc. indicating attempts at rough force. The tilt detection mode detects the unauthorised handling of a valuable object.

 

For more details pleas click here

JA-150ST Wireless fire and temperature detector
The JA-150ST optical wireless smoke and temperature detector detects fire inside residential or commercial premises. It allows these settings: smoke and heat, smoke or heat, smoke only, heat only.

 

For more details pleas click here

JA-151ST The JA-151ST Wireless combined smoke and heat detector
It is used to detect fire hazards in the interior of residential or commercial buildings. The detector can be installed in mobile homes or caravans. The product is not designed to be installed in industrial premises.

 

Declaration of conformity

Declaration of performance

JA-151TH Wireless temperature detector
It supports heating control by means of a control panel programmable output based on the measured temperature. All the functions are set in MyJABLOTRON, allowing the user to monitor and control everything anytime anywhere.

 

For more details pleas click here

GS-133-24 Gas Detector
The GS-133-24 detects all mixtures of air and combustible gas (Natural Gas, Methane, Propane, Butane, Acetylene, GPL etc). The detector detects two levels of gas concentration. (24V DC)

 

For more details pleas click here

EI208W Stand-alone carbon monoxide detector
The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.
EI208DW Stand-alone carbon monoxide detector with display
The product serves for the detection of CO (carbon monoxide) gas and early warning to avoid the harmful effects of this gas on human health.
JA-150EM-DIN Wireless module for the impulse output of an electric meter
The module for DIN-rail installation is designed to display electric meter readings, which is available for customers via the MyJablotron Web Self-Service.

 

For more details pleas click here

JA-150A Wireless internal siren
A wireless siren for indoor use, the JA-150A is designed for acoustic alarm signaling, as well as entrance and exit delays and PG output activations in the security system.

 

For more details pleas click here

JA-162A Indoor wireless siren for electrical sockets
The JA-162A siren is designed indicate alarms inside a building It can also be used for other acoustic indications such as the activation of PG outputs, entry/exit delays or as a door bell.

 

For more details pleas click here

JA-151A Wireless outdoor siren
The JA-151A backed-up wireless outdoor siren is designed for alarm signaling, and PG output activation signalling.
JA-180A Wireless outdoor siren
The JA-80A is a wire-free siren in a solid housing. Its lithium battery lasts up to 3 years.

 

For more details pleas click here

JA-154J MS Bi-directional four-button keyfob
It enables the remote control of the security system, plus various electric appliances, or triggering an emergency alarm. Confirmation of the execution of a command through optical and acoustic feedback.

 

For more details pleas click here

JA-186JK Key fob remote control – black
The black RC-186JK is designed to remotely control setting/unsetting, trigger panic alarms and control other appliances. A two button version of the case is also available.

 

For more details pleas click here

JA-182J Wireless remote control
The JA-182J remote control is designed to remotely arm/disarm the system, activate panic alarms and control equipment . The key fob has a built-in convenient "child lock".

 

For more details pleas click here

JA-188J Wireless panic button
The RC-188J is mainly used as a wireless panic or emergency button. It is designed to be a remote control for setting/unsetting an alarm system or remotely controlling other appliances.

 

For more details pleas click here

JA-189J Wireless door bell button
The JA-189J works mainly as a doorbell button. The JA-189J can also be enrolled to the control panel as a hidden panic button or to operate PG outputs.

 

For more details pleas click here

JA-187J Wireless wrist button
The JA-187J panic button can remotely activate an emergency alarm or operate different devices. It is used mainly for the personal calling for help.

 

For more details pleas click here

JA-185J Remote control for car
This module is designed for car installation and to control devices (for example garage doors, parking entrance gates). It is powered by 12 V or 24 V from the car.

 

For more details pleas click here

JA-190J RFID access card for the JA-100 system
RFID access card for the JA-100 system. 125 kHz / unique Jablotron code
JA-192J RFID entry key tag
An access tag to the JABLOTRON 100 system with the shape of a key tag in black.
JA-190T RFID card and key tag reader for PC (connected by USB)
RFID card and tag readers designed to easily enroll the JA-190J and JA-191J into the JA-100 system by using F-link SW.

 

For more details pleas click here